Zaxcom Nomad Bedienungsanleitung PDF herunterladen (Seite 47)

Zaxcom Nomad User’s Manual_____________________________________________________Chapter 2

Input Configure page

Page purpose: This page configures which inputs are available.

How to get here:

( MENU knob once  Mode button  Input Configure button)

Figure 2-47 Input Configuration page

The factory default is set up so that Nomad can handle one pair of AES inputs. If more than one pair of AES inputs

is required, then the Input configuration must be changed in order to make the AES additional resources available.

This page is used to select between AES inputs and other Nomad resources. Put simply, for Nomad’s processors

to handle the additional AES channels, other sources may need to be deactivated. Eight selections are provided to

give you various options of AES inputs, tape return 3/4 and analog input 5/6. You can choose which option works

best for you. A factory reset has no effect on this page.

ENG Setup page

Page purpose: This page setsup Nomad’s engineering parameters.

How to get here:

(MENU knob once  ENG Setup button)

Figure 2-48 ENG Setup page

This page is designed to configure the device for your specific application. This page sets the input and output

levels as well as other ENG parameters.

Transport Keys parameter

The two possibilities are:

SHIFTED: pressing the TC key, A-MIX key or ZNET key immediately displays the page associated with those

keys. To go into Record mode, Playback mode or Stop mode, it is necessary to press the MENU knob / SHIFT

key while pressing the REC key, PLAY key or STOP key to change the Transport mode.

NOTE: it is still possible to directly access the transport functions by pressing the appropriate key for 1 second.

UNSHIFTED: pressing the REC key, PLAY key or STOP key immediately puts the unit into Record mode,

Playback mode or Stop mode, as appropriate. To display the pages associated with the Timecode Slate page

{p.26}, Auto-mix page and ZaxNet Channel page {p.29}, it is necessary to press the MENU knob / SHIFT key

while pressing the TC key, A-MIX key and ZNET key.

NOTE: Auto-mix is a work in progress and is not currently available.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 73 74

Keine Kommentare

Zaxcom Nomad Bedienungsanleitung Seite 47