Zaxcom Nomad Bedienungsanleitung PDF herunterladen (Seite 35)

Zaxcom Nomad User’s Manual_____________________________________________________Chapter 2

Analog Input Channel Setup page

Page purpose: This page controls the operating parameters for each of the analog inputs.

How to get here:

(SETUP key once)

Figure 2-20 Analog Input Channel Setup page

While in this page, pressing any of the multi-function keys will select the input channels one through ten. An input

meter is provided to help adjust the trim.

Press and rotate the MENU knob to select and change each channel input function. Channel input functions

include: input trim, input type, channel delay, highpass filter, phase, compressor limiter, phantom power enable

and two notch filters. Use the HEADPHONE knob to return to the Home page {p.23}. Each notch filter has

separate On/Off and frequency adjustments. The notch frequency can be entered by using the number keys, as

well as the MENU knob.

NOTE: The HPF button does double duty. Turning it ON turns on an analog filter with a fixed cutoff frequency

of 100 Hz and a digital filter with the cutoff frequency controlled by the HPF FREQ button.

Headphone-1 page

Page purpose: This page controls which audio busses are routed to the Headphone-1 connector.

How to get here:

(simultaneously press MENU knob and HEADPHONE knob)

Figure 2-21 Headphone-1 Monitor Sources page

Nomad’s main monitor connection can retain up to 12 Monitor Presets, each consisting of any combination of card

tracks, output busses or returns. If selected, wireless microphone receivers can be monitored directly through the

ZaxNet System on Nomad 6, 8 and 12.

NOTE: The ZaxNet monitor points feed the headphones as split mono. Only one can be enabled at a time.

To create those User Presets, see Retaining Your Headphone Mix with a Monitor Preset {p.63}.

From the Home page {p.23}, you can cycle through the Monitor Presets using the HEADPHONE knob:

press it to move to the NEXT preset

press and hold it to move to the PREVIOUS preset

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 73 74

Keine Kommentare

Zaxcom Nomad Bedienungsanleitung Seite 35